How RESPOND Neutralizes Zero-Day Ransomware Attacks
14
Jan 2020
14
Jan 2020
Discover how Cyber AI is taking back the advantage over cyber security threats. See how Darktrace helps save time, money, resources, and reputation.
The FBI estimates that, on average, more than 4,000 ransomware attacks have occurred every day since 2016. Operating at machine speeds, ransomware is capable of wreaking havoc on a digital enterprise within mere seconds. And unfortunately, traditional security tools are only programmed to detect known cyber-threats using rules and signatures – leaving them blind to tailored and novel ransomware threats that have never been seen before in the wild.
Because Darktrace’s fundamental approach to cyber defense does not rely on rules and signatures to identify emerging threats, it is in a unique position to neutralize novel attacks. In one recent customer environment, Darktrace RESPOND (formerly known as 'Antigena') stopped a previously-unknown ‘zero-day’ ransomware attack targeting an electronics manufacturer. Even when deployed over a fraction of the digital estate, Darktrace RESPOND was able to neutralize this never-before-seen ransomware strain before it could do any damage.
Imperfect visibility, perfect response
While Darktrace provides 100% coverage of the entire digital infrastructure, from email and cloud to IoT and networks, business challenges sometimes prevent users from obtaining full visibility into their environment. However, even when working with imperfect data and suboptimal coverage, Cyber AI can still identify ongoing threats as they emerge. In the below attack, Darktrace was not covering the initial stages of the attack lifecycle, including the initial infection and command & control establishment – yet the AI was able to autonomously respond within seconds, before the attack escalated into a crisis.
Anatomy of a ransomware attack
In this example, Darktrace’s AI identified patient zero deviating significantly from its typical pattern of internal behavior. This was illustrated by a spike in the pattern of regular connections made by patient zero and a series of high-confidence alerts firing in quick succession. These included:
Compromise / Ransomware / Suspicious SMB Activity — triggers when a device begins making unusual SMB connections across the organization
Antigena Ransomware Block — triggers Antigena to take an action when the behavior is significantly similar to ransomware
Device / Reverse DNS Sweep — triggers when a device makes unusual reverse DNS lookups, a tactic often used during reconnaissance
Figure 1: Several Darktrace alerts fire, and a deviation from the regular pattern of life is visible
Indeed, not only was the device observed making an unexpectedly large number of connections, but it was also reading and writing a large number of SMB files and transferring this data internally to a server it did not usually communicate with. The spike in internal connections between patient zero and the server was a strong indicator of malware attempting to move laterally through the network.
Figure 2: Four model breaches observed on October 30th and a dotted line representing Antigena’s actions
Further investigation into the SMB activity revealed that hundreds of Dropbox-related files were accessed on SMB shares that the device had not previously accessed. Moreover, several of these files started becoming encrypted, appended with a [HELP_DECRYPT] extension.
Figure 3: Darktrace detects SMB activity relating to Dropbox files
Fortunately, Darktrace RESPOND was in Active Mode, and kicked in a second later, enforcing the usual pattern of life by blocking anomalous connections for five minutes, immediately stopping the encryption. By the time Darktrace’s AI took action, only four of these files were successfully encrypted.
Figure 4: Darktrace RESPOND kicks in 1 second after ransomware was detected
Figure 5: More Antigena (RESPOND) alerts and a clear indication of the unusual activity detected
RESPOND then took a second action to stop the ransomware from spreading to other devices. The combination of various anomalous activities was sufficient evidence for Autonomous Response to neutralize the threat: patient zero was quarantined for 24 hours, unable to connect to the server or any other device on the network.
Figure 6: Darktrace stops the infected device from conducting lateral movement & ransom activity
Darktrace RESPOND therefore not only stopped the encryption activity in its tracks, but also prevented the attackers from moving laterally across the network unimpeded – either by scanning, using harvested admin credentials, or performing internal reconnaissance. Autonomous Response initiated a surgical intervention that halted the malware’s spread, all while allowing normal business operations to continue.
No signatures, no problem
Crucially, this strain of ransomware was not associated with any publicly known indicators of compromise such as blacklisted command & control domains or malware file hashes. Darktrace was able to detect this never-before-seen attack based purely on its comprehensive understanding of the normal pattern of life for every device and user within the organization. Once the deviation from this normal behavior was identified, Antigena was able to stop it immediately – without relying on rules, signatures, or historical data. With autonomous response acting decisively and immediately, the security team had enough time to catch up and perform hands-on incident response work.
Darktrace’s AI provides a potent combination: Darktrace DETECT's capacity to reveal deviations in a device’s behavior together with RESPOND acting to block connections and contain the ransomware from spreading across the enterprise. AI-enabled Autonomous Response neutralized the threat by recognizing the lethal recipe of these unusual internal alerts and taking targeted action against the ransomware. This stealthy strain of ransomware is unlikely to have been noticed, let alone stopped, by a security team reliant on legacy tools.
The Return-On-Security-Investment (ROSI) is often discussed when it comes to cyber security expenditure, and this incident provides a great example of the ROSI manifesting itself – recent ransomware attacks usually demand hundreds of thousands of dollars’ worth of ransom payments. Without Darktrace RESPOND containing the threat at an early stage, it is likely that thousands of files would have been encrypted. By relying on Cyber AI, the company was able to take back the advantage over an ever-evolving adversary, saving time, money, resources, and – perhaps most critically – the company’s reputation.
Like this and want more?
Receive the latest blog in your inbox
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
NEWSLETTER
Like this and want more?
Stay up to date on the latest industry news and insights.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Darktrace cyber analysts are world-class experts in threat intelligence, threat hunting and incident response, and provide 24/7 SOC support to thousands of Darktrace customers around the globe. Inside the SOC is exclusively authored by these experts, providing analysis of cyber incidents and threat trends, based on real-world experience in the field.
AUTHOR
ABOUT ThE AUTHOR
Max Heinemeyer
Chief Product Officer
Max is a cyber security expert with over a decade of experience in the field, specializing in a wide range of areas such as Penetration Testing, Red-Teaming, SIEM and SOC consulting and hunting Advanced Persistent Threat (APT) groups. At Darktrace, Max is closely involved with Darktrace’s strategic customers & prospects. He works with the R&D team at Darktrace, shaping research into new AI innovations and their various defensive and offensive applications. Max’s insights are regularly featured in international media outlets such as the BBC, Forbes and WIRED. Max holds an MSc from the University of Duisburg-Essen and a BSc from the Cooperative State University Stuttgart in International Business Information Systems.
Darktrace has been named as Microsoft UK Partner of the Year for 2024! The Microsoft Partner Awards recognize winners for their commitment to customers, impact of solutions, and exemplary use of Microsoft technologies.
Whilst the award was granted based on our innovations combining Darktrace/Email and Microsoft Defender for Office 365, our shared values go beyond technology. Darktrace stood out for the integration of our products to deliver exceptional security value to customers, as well as our investment in partnerships, marketplace and go to market. Microsoft was also impressed with our strong commitment to diversity and inclusion and our broader contribution to both the UK economy and the UK tech sector.
Microsoft Defender for Office 365 + Darktrace/Email leave attackers nowhere to hide
The email threat landscape is constantly evolving. Attacks are becoming more sophisticated, more targeted and increasing in multi-stage payload attacks. Across the Darktrace customer base in 2023 alone, we have seen a 135% increase in ‘novel social engineering attacks’, corresponding with the rise of ChatGPT, 45% of phishing emails were identified as spear phishing attempts and a 59% increase in multi-stage payload attacks.
Legacy defenses were built to address a high volume of unsophisticated attacks, but generative AI has shifted the threats towards lower quantity yet very sophisticated, high impact targeted attacks. Microsoft Defender for Office 365’s rapid innovation has outpaced the Secure Email Gateway’s rule and signature based historical data approach. Customers no longer need email gateways which duplicate workflows and add expense native to their Defender for O365 solution.
Point email solutions overlap with Microsoft in 3 key areas: detection approach, workflows, capabilities
Detection - Microsoft receives trillions threat signals daily, giving customers the broadest scope of the attack landscape. Darktrace combined with Microsoft unites business and attack centric approaches
Workflows – any Microsoft configurations are reflected automatically in Darktrace/Email. Users can keep daily workflow in Microsoft, while a traditional SEG requires duplicated workflows
Capabilities – Microsoft handles foundational elements like archiving/encryption/signature matching while Darktrace handles advanced threat security
Darktrace/Email is built to elevate, not duplicate, Microsoft email security – removing the burden of operating legacy point solutions and blocking 25% more threats. Robust account takeover protections to stop the 38% of sophisticated threats other tools miss. Customers can seamlessly correlate activity and insights across Microsoft email, DMARC and Teams to stop threats on average 13 days earlier.
Azure Marketplace
Microsoft Azure customers can access Darktrace in the Azure Marketplace to take advantage of the scalability, reliability, and agility of Azure to drive rapid IT operations and security integrations across the enterprise. Customers can leverage their Microsoft Azure Consumption Commitments (MACC), making procurement simple. As UK Partner of the Year winner, customers know they have a trusted partner with Darktrace and a proven solution to work seamlessly with Azure.
Following up on our Conversation: Detecting & Containing a LinkedIn Phishing Attack with Darktrace
25
Jun 2024
Note: Real organization, domain and user names have been modified and replaced with fictitious names to maintain anonymity.
Social media cyber-attacks
Social media is a known breeding ground for cyber criminals to easily connect with a near limitless number of people and leverage the wealth of personal information shared on these platforms to defraud the general public. Analysis suggests even the most tech savvy ‘digital natives’ are vulnerable to impersonation scams over social media, as criminals weaponize brands and trends, using the promise of greater returns to induce sensitive information sharing or fraudulent payments [1].
LinkedIn phishing
As the usage of a particular social media platform increases, cyber criminals will find ways to exploit the increasing user base, and this trend has been observed with the rise in LinkedIn scams in recent years [2]. LinkedIn is the dominant professional networking site, with a forecasted 84.1million users by 2027 [3]. This platform is data-driven, so users are encouraged to share information publicly, including personal life updates, to boost visibility and increase job prospects [4] [5]. While this helps legitimate recruiters to gain a good understanding of the user, an attacker could also leverage the same personal content to increase the sophistication and success of their social engineering attempts.
Darktrace detection of LinkedIn phishing
Darktrace detected a Software-as-a-Service (SaaS) compromise affecting a construction company, where the attack vector originated from LinkedIn (outside the monitoring of corporate security tools), but then pivoted to corporate email where a credential harvesting payload was delivered, providing the attacker with credentials to access a corporate file storage platform.
Because LinkedIn accounts are typically linked to an individual’s personal email and are most commonly accessed via the mobile application [6] on personal devices that are not monitored by security teams, it can represent an effective initial access point for attackers looking to establish an initial relationship with their target. Moreover, user behaviors to ignore unsolicited emails from new or unknown contacts are less frequently carried over to platforms like LinkedIn, where interactions with ‘weak ties’ as opposed to ‘strong ties’ are a better predictor of job mobility [7]. Had this attack been allowed to continue, the threat actor could have leveraged access to further information from the compromised business cloud account to compromise other high value accounts, exfiltrate sensitive data, or defraud the organization.
LinkedIn phishing attack details
Reconnaissance
The initial reconnaissance and social engineering occurred on LinkedIn and was thus outside the purview of corporate security tools, Darktrace included.
However, the email domain “hausconstruction[.]com” used by the attacker in subsequent communications appears to be a spoofed domain impersonating a legitimate construction company “haus[.]com”, suggesting the attacker may have also impersonated an employee of this construction company on LinkedIn. In addition to spoofing the domain, the attacker seemingly went further to register “hausconstruction.com” on a commercial web hosting platform. This is a technique used frequently not just to increase apparent legitimacy, but also to bypass traditional security tools since newly registered domains will have no prior threat intelligence, making them more likely to evade signature and rules-based detections [8]. In this instance, open-source intelligence (OSINT) sources report that the domain was created several months earlier, suggesting this may have been part of a targeted attack on construction companies.
Initial Intrusion
It was likely that during the correspondence over LinkedIn, the target user was solicited into following up over email regarding a prospective construction project, using their corporate email account. In a probable attempt to establish a precedent of bi-directional correspondence so that subsequent malicious emails would not be flagged by traditional security tools, the attacker did not initially include suspicious links, attachments or use solicitous or inducive language within their initial emails.
Figure 1: Example of bi-directional email correspondence between the target and the attacker impersonating a legitimate employee of the construction company haus.com.
Figure 2: Cyber AI Analyst investigation into one of the initial emails the target received from the attacker.
To accomplish the next stage of their attack, the attacker shared a link, hidden behind the inducing text “VIEW ALL FILES”, to a malicious file using the Hightail cloud storage service. This is also a common method employed by attackers to evade detection, as this method of file sharing does not involve attachments that can be scanned by traditional security tools, and legitimate cloud storage services are less likely to be blocked.
OSINT analysis on the malicious link link shows the file hosted on Hightail was a HTML file with the associated message “Following up on our LinkedIn conversation”. Further analysis suggests the file contained obfuscated Javascript that, once opened, would automatically redirect the user to a malicious domain impersonating a legitimate Microsoft login page for credential harvesting purposes.
Figure 3: The malicious HTML file containing obfuscated Javascript, where the highlighted string references the malicious credential harvesting domain.
Figure 4: Screenshot of fraudulent Microsoft Sign In page hosted on the malicious credential harvesting domain.
Although there was prior email correspondence with the attacker, this email was not automatically deemed safe by Darktrace and was further analyzed for unusual properties and unusual communications for the recipient and the recipient’s peer group.
Darktrace determined that:
It was unusual for this file storage solution to be referenced in communications to the user and the wider network
Textual properties of the email body suggested a high level of inducement from the sender, with a high level of focus on the phishing link.
The full link contained suspicious properties suggesting it is high risk.
Figure 5: Darktrace’s analysis of the phishing email, presenting key information about the unusual characteristics of this email, information on highlighted content, and an overview of actions that were initially applied.
Based on these anomalies, Darktrace initially moved the phishing email to the junk folder and locked the link, preventing the user from directly accessing the malicious file hosted on Hightail. However, the customer’s security team released the email, likely upon end-user request, allowing the target user to access the file and ultimately enter their credentials into that credential harvesting domain.
Figure 6: Darktrace alerts triggered by the malicious phishing email and the corresponding Autonomous Response actions.
Lateral Movement
Correspondence between the attacker and target continued for two days after the credential harvesting payload was delivered. Five days later, Darktrace detected an unusual login using multi-factor authentication (MFA) from a rare external IP and ASN that coincided with Darktrace/Email logs showing access to the credential harvesting link.
This attempt to bypass MFA, known as an Office365 Shell WCSS attack, was likely achieved by inducing the target to enter their credentials and legitimate MFA token into the fake Microsoft login page. This was then relayed to Microsoft by the attacker and used to obtain a legitimate session. The attacker then reused the legitimate token to log into Exchange Online from a different IP and registered the compromised device for MFA.
Figure 7: Screenshot within Darktrace/Email of the phishing email that was released by the security team, showing the recipient clicked the link to file storage where the malicious payload was stored.
Figure 8: Event Log showing a malicious login and MFA bypass at 17:57:16, shortly after the link was clicked. Highlighted in green is activity from the legitimate user prior to the malicious login, using Edge. Highlighted in orange and red is the malicious activity using Chrome.
The IP addresses used by the attacker appear to be part of anonymization infrastructure, but are not associated with any known indicators of compromise (IoCs) that signature-based detections would identify [9] [10].
In addition to logins being observed within half an hour of each other from multiple geographically impossible locations (San Francisco and Phoenix), the unexpected usage of Chrome browser, compared to Edge browser previously used, provided Darktrace with further evidence that this activity was unlikely to originate from the legitimate user. Although the user was a salesperson who frequently travelled for their role, Darktrace’s Self-Learning AI understood that the multiple logins from these locations was highly unusual at the user and group level, and coupled with the subsequent unexpected account modification, was a likely indicator of account compromise.
Accomplish mission
Although the email had been manually released by the security team, allowing the attack to propagate, additional layers of defense were triggered as Darktrace's Autonomous Response initiated “Disable User” actions upon detection of the multiple unusual logins and the unauthorized registration of security information.
However, the customer had configured Autonomous Response to require human confirmation, therefore no actions were taken until the security team manually approved them over two hours later. In that time, access to mail items and other SharePoint files from the unusual IP address was detected, suggesting a potential loss of confidentiality to business data.
Figure 9: Advanced Search query showing several FilePreviewed and MailItemsAccessed events from either the IPs used by the attacker, or using the software Chrome. Note some of the activity originated from Microsoft IPs which may be whitelisted by traditional security tools.
However, it appears that the attacker was able to maintain access to the compromised account, as login and mail access events from 199.231.85[.]153 continued to be observed until the afternoon of the next day.
Conclusion
This incident demonstrates the necessity of AI to security teams, with Darktrace’s ActiveAI Security Platform detecting a sophisticated phishing attack where human judgement fell short and initiated a real-time response when security teams could not physically respond as fast.
Security teams are very familiar with social engineering and impersonation attempts, but these attacks remain highly prevalent due to the widespread adoption of technologies that enable these techniques to be deployed with great sophistication and ease. In particular, the popularity of information-rich platforms like LinkedIn that are geared towards connecting with unknown people make it an attractive initial access point for malicious attackers.
In the second half of 2023 alone, over 200 thousand fake profiles were reported by members on LinkedIn [11]. Fake profiles can be highly sophisticated, use professional images, contain compelling descriptions, reference legitimate company listings and present believable credentials.
It is unrealistic to expect end users to defend themselves against such sophisticated impersonation attempts. Moreover, it is extremely difficult for human defenders to recognize every fraudulent interaction amidst a sea of fake profiles. Instead, defenders should leverage AI, which can conduct autonomous investigations without human biases and limitations. AI-driven security can ensure successful detection of fraudulent or malicious activity by learning what real users and devices look like and identifying deviations from their learned behaviors that may indicate an emerging threat.
Appendices
Darktrace Model Detections
DETECT/ Apps
SaaS / Compromise / SaaS Anomaly Following Anomalous Login
SaaS / Compromise / Unusual Login and Account Update
