Introduction

Perimeter devices such as firewalls, virtual private networks (VPNs), and intrusion prevention systems (IPS), have long been the target of adversarial actors attempting to gain access to internal networks. However, recent publications and public service announcements by leading public institutions underscore the increased emphasis threat actors are putting on leveraging such products to initiate compromises.

A blog post by the UK National Cyber Security Center (NCSC) released in early 2024 notes that as improvements are made in the detection of phishing email payloads, threat actors have again begun re-focusing efforts to exploiting network edge devices, many of which are not secure by design, as a means of breach initiation.^[i] As such, it comes as no surprise that new Common Vulnerabilities and Exposures (CVEs) are constantly discovered that exploit such internet-exposed systems.

Darktrace analysts frequently observe the impacts of such CVEs first through their investigations via Darktrace’s Security Operations Center (SOC), sometimes even before the public disclosure of proof of concepts for such exploits.  Beginning April 2024, Darktrace’s SOC began handling alerts and customer requests for potential incidents involving Palo Alto Networks firewall devices.  It was during this time that external researchers publicly disclosed what would later be classified as PAN-OS CVE-2024-3400, a form of remote command execution vulnerability that affects several versions of Palo Alto Networks’ firewall operating System (PAN-OS), namely PAN-OS 11.1, 11.0 and 10.2.

The increase in observed SOC activity for Palo Alto firewall devices, coupled with the public announcement of the new CVE, prompted Darktrace researchers to look for evidence of PAN-OS exploitation on customer networks. Researchers also focused on documenting post-exploitation activity from threat actors leveraging the recently disclosed vulnerability.

As such, this blog highlights the network-based behaviors involved in the CVE-2024-3400 attack chains investigated by Darktrace’s SOC and Threat Research teams. Moreover, this investigation also provides a deeper insight into the post-compromise activities of threat actors leveraging the novel CVE.  Such insights will not only prove relevant for cybersecurity teams looking to inhibit compromises in this specific instance, but also highlights general patterns of behavior by threat actors utilizing such CVEs to target internet-facing systems.

CVE-2024-3400

In April 2024, the Darktrace SOC observed an uptick in activity involving recurring patterns of malicious activity from Palo Alto firewall appliances. In response to this trend, Darktrace initiated a Threat Research investigation into such activity to try and identify common factors and indicators across seemingly parallel events. As the Threat Research team opened their investigation, external researchers concurrently provided public details of CVE-2024-3400, a form of remote command execution vulnerability in the GlobalProtect feature on Palo Alto Network firewall devices running PAN-OS versions: 10.2, 11.0, and 11.1.^[ii]

In their proof of concept, security researchers at watchTowr demonstrated how an attacker can pass session ID (SESSID) values to these PAN-OS devices to request files that do not exist. In response, the system creates a zero-byte file with root privileges with the same name.^[iii] Log data is passed on devices running telemetry services to external servers through command line functionality.^[iv] Given this functionality, external actors could then request non-existent files in the SESSID containing command parameters which then be interpreted by the command line functionality.^[v] Although researchers first believed the exploit could only be used against devices running telemetry services, this was later discovered to be untrue.^[vi]

As details of CVE-2024-3400 began to surface, Darktrace’s Threat Research analysts quickly identified distinct overlaps in the observed activity on specific customer deployments and the post-exploitation behavior reported by external researchers. Given the parallels, Darktrace correlated the patterns of activity observed by the SOC team to exploitation of the newly discovered vulnerability in PAN-OS firewall appliances.

Campaign Analysis

Between the April and May 2024, Darktrace identified four main themes of post-exploitation activity involving Palo Alto Network firewall devices likely targeted via CVE-2024-3400: exploitation validation, shell command and tool retrieval, configuration data exfiltration, and ongoing command and control through encrypted channels and application protocols.

1. Exploit Validation and Further Vulnerability Enumeration

Many of the investigated attack chains began with malicious actors using out-of-band application security testing (OAST) services such as Interactsh to validate exploits against Palo Alto firewall appliances. This exploit validation activity typically resulted in devices attempting to contact unusual external endpoints (namely, subdomains of ‘oast[.]pro’, ‘oast[.]live’, ‘oast[.]site’, ‘oast[.]online’, ‘oast[.]fun’, ‘oast[.]me’, and ‘g3n[.]in’) associated with OAST services such as Interactsh. These services can be used by developers to inspect and debug internet traffic, but also have been easily abused by threat actors.

While attempted connections to OAST services do not alone indicate CVE-2024-3400 exploitation, the prevalence of such activities in observed Palo Alto firewall attack chains suggests widespread usage of these OAST services to validate initial access methods and possibly further enumerate systems for additional vulnerabilities.

2. Command and Payload Transmission

The most common feature across analyzed incidents was HTTP GET requests for shell scripts and Linux executable files (ELF) from external IPs associated with exploitation of the CVE. These HTTP requests were frequently initiated using the utilities, cURL and wget. On nearly every device likely targeted by threat actors leveraging the CVE, Darktrace analysts highlighted the retrieval of shell scripts that either featured enumeration commands, the removal of evidence of compromise activity, or commands to retrieve and start binaries on the destination device.

a) Shell Script Retrieval

Investigated devices commonly performed HTTP GET requests to retrieve shell command scripts. Despite this commonality, there was some degree of variety amongst the retrieved payloads and their affiliation with certain command tools. Several distinct types of shell commands and files were identified during the analyzed breaches. For example, some firewall devices were seen requesting .txt files associated with both Sliver C2, whose malicious use has previously been investigated by Darktrace, and Cobalt Strike. The target URIs of devices’ HTTP requests for these files included, “36shr.txt”, “2.txt”, “bin.txt”, and “data.txt”.

More interestingly, though, was the frequency with which analyzed systems requested bash scripts from rare external IP addresses, sometimes over non-standard ports for the HTTP protocol. These bash scripts would feature commands usually for the recipient system to check for certain existing files and or running processes. If the file did not exist, the system would then use cURL or wget to obtain content from external sites, change the permissions of the file, and then execute, sending output to dev/null as a means of likely defense evasion. In some scripts, the system would first make a new folder, and change directories prior to acquiring external content. Additionally, some samples highlighted multiple attempts at enumeration of the host system.

Not every retrieved file that was not explicitly a binary featured bash scripts. Model alerts on some deployments also included file masquerading attempts by threat actors, whereby the Palo Alto firewall device would request content with a misleading extension in the URI. In one such instance, the requested URI, and HTTP response header suggests the returned content is an image/png, but the actual body response featured configuration parameters for a new daemon service to be run on the system.

Bash scripts analyzed across customer deployments also mirrored those identified by external security teams. External researchers previously reported on a series of identifiable shell commands in some cases of CVE-2024-3400 exploitation analyzed by their teams. Commands frequently involved a persistence mechanism they later labeled as the “UPSTYLE” backdoor.^[vii]  This python-based program operates by reading commands hidden in error logs generated by 404 requests to the compromised server. The backdoor interprets the requests and writes the output to CSS files on the device. In many cases, Darktrace’s Threat Research team noted clear parallels between shell commands retrieved via HTTP GET request with those directly involving UPSTYLE. There were also matches with some URI patterns identified with the backdoor and requests observed on Darktrace deployments.

The presence of these UPSTYLE-related shell commands in response to Palo Alto firewall devices’ HTTP requests provides further evidence for initial exploitation of the CVE. Many bash scripts in examined cases interacted with folders and files likely related to CVE-2024-3400 exploitation. These scripts frequently sought to delete contents of certain folders, such as “/opt/panlogs/tmp/device_telemetry/minute/*” where evidence of exploitation would likely reside. Moreover, recursive removal and copy commands were frequently seen targeting CSS files within the GlobalProtect folder, already noted as the vulnerable element within PAN-OS versions. This evidence is further corroborated by host-based forensic analysis conducted by external researchers.^[viii]

b) Executable File Retrieval

Typically, following command processing, compromised Palo Alto firewall devices proceeded to make web requests for several unusual and potentially malicious files. Many such executables would be retrieved via processed scripts. While there a fair amount of variety in specific executables and binaries obtained, overall, these executables involved either further command tooling such as Sliver C2 or Cobalt Strike payloads, or unknown executables. Affected systems would also employ uncommon ports for HTTP connections, in a likely attempt to evade detection. Extensions featured within the URI, when visible, frequently noted ‘.elf’ (Linux executable) or ‘.exe’ payloads. While most derived hashes did not feature identifiable open-source intelligence (OSINT) details, some samples did have external information tying the sample to specific malware. For example, one such investigation featured a compromised system requesting a file with a hash identified as the Spark malware (backdoor) while another investigated case included a host requesting a known crypto-miner.

3. Configuration Data Exfiltration and Unusual HTTP POST Activity

During Darktrace’s investigations, there were also several instances of sensitive data exfiltration from PAN-OS firewall devices. Specifically, targeted systems were observed making HTTP POST requests via destination port 80 to rare external endpoints that OSINT sources associate with CVE-2024-3400 exploitation and activity. PCAP analysis of such HTTP requests revealed that they often contained sensitive configuration details of the targeted Palo Alto firewall devices, including the IP address, default gateway, domain, users, superusers, and password hashes, to name only a few. Threat actors frequently utilized Target URIs such as “/upload” in their HTTP POST requests of this multi-part boundary form data. Again, the User-Agent headers of these HTTP requests largely involved versions of cURL, typically 7.6.1, and wget.

4. Ongoing C2 and Miscellaneous Activity

Lastly, a smaller number of affected Palo Alto firewall devices were seen engaging in repeated beaconing and/or C2 communication via both encrypted and unencrypted protocols during and following the initial series of kill chain events. Such encrypted channels typically involved protocols such as TLS/SSL and SSH. This activity likely represented ongoing communication of targeted systems with attacker infrastructure. Model alerts typically highlighted unusual levels of repeated external connectivity to rare external IP addresses over varying lengths of time. In some investigated incidents, beaconing activity consisted of hundreds of thousands of connections over several days.

Some beaconing activity appears to have involved the use of the WebSocket protocol, as indicated by the appearance of “/ws” URIs and validated within packet captures. Such connections were then upgraded to an encrypted connection.

While not directly visible in all the deployments, some investigations also yielded evidence of attempts at further post-exploitation activity. For example, a handful of the analyzed binaries that were downloaded by examined devices had OSINT information suggesting a relation to crypto-mining malware strains. However, crypto-mining activity was not directly observed at this time. Furthermore, several devices also triggered model alerts relating to brute-forcing activity via several authentication protocols (namely, Keberos and RADIUS) during the time of compromise. This brute-force activity likely represented attempts to move laterally from the affected firewall system to deeper parts of the network.

Conclusion

Between April and late May 2024, Darktrace’s SOC and Threat Research teams identified several instances of likely PAN-OS CVE-2024-3400 exploitation across the Darktrace customer base. The subsequent investigation yielded four major themes that categorize the observed network-based post-exploitation activity. These major themes were exploit validation activity, retrieval of binaries and shell scripts, data exfiltration via HTTP POST activity, and ongoing C2 communication with rare external endpoints. The insights shared in this article will hopefully contribute to the ongoing discussion within the cybersecurity community about how to handle the likely continued exploitation of this vulnerability. Moreover, this article may also help cybersecurity professionals better respond to future exploitation of not only Palo Alto PAN-OS firewall devices, but also of edge devices more broadly.

Threat actors will continue to discover and leverage new CVEs impacting edge infrastructure. Since it is not yet known which CVEs threat actors will exploit next, relying on rules and signatures for the detection of exploitation of such CVEs is not a viable approach. Darktrace’s anomaly-based approach to threat detection, however, is well positioned to robustly adapt to threat actors’ changing methods, since although threat actors can change the CVEs they exploit, they cannot change the fact that their exploitation of CVEs results in highly unusual patterns of activity.

Credit to Adam Potter, Cyber Analyst, Sam Lister, Senior Cyber Analyst

Appendices ‍

Indicators of Compromise

Indicator – Type – Description

94.131.120[.]80              IP             C2 Endpoint

94.131.120[.]80:53/?src=[REDACTED]=hour=root                  URL        C2/Exfiltration Endpoint

134.213.29[.]14/?src=[REDACTED]min=root             URL        C2/Exfiltration Endpoint

134.213.29[.]14/grep[.]mips64            URL        Payload

134.213.29[.]14/grep[.]x86_64             URL        Payload

134.213.29[.]14/?deer               URL        Payload

134.213.29[.]14/?host=IDS   URL        Payload

134.213.29[.]14/ldr[.]sh           URL        Payload

91ebcea4e6d34fd6e22f99713eaf67571b51ab01  SHA1 File Hash               Payload

185.243.115[.]250/snmpd2[.]elf        URL        Payload

23.163.0[.]111/com   URL        Payload

80.92.205[.]239/upload            URL        C2/Exfiltration Endpoint

194.36.171[.]43/upload            URL        C2/Exfiltration Endpoint

update.gl-protect[.]com          Hostname         C2 Endpoint

update.gl-protect[.]com:63869/snmpgp      URL        Payload

146.70.87[.]237              IP address         C2 Endpoint

146.70.87[.]237:63867/snmpdd         URL        Payload

393c41b3ceab4beecf365285e8bdf0546f41efad   SHA1 File Hash               Payload

138.68.44[.]59/app/r URL        Payload

138.68.44[.]59/app/clientr     URL        Payload

138.68.44[.]59/manage            URL        Payload

72.5.43[.]90/patch      URL        Payload

217.69.3[.]218                 IP             C2 Endpoint

5e8387c24b75c778c920f8aa38e4d3882cc6d306                  SHA1 File Hash               Payload

217.69.3[.]218/snmpd[.]elf   URL        Payload

958f13da6ccf98fcaa270a6e24f83b1a4832938a    SHA1 File Hash               Payload

6708dc41b15b892279af2947f143af95fb9efe6e     SHA1 File Hash               Payload

dc50c0de7f24baf03d4f4c6fdf6c366d2fcfbe6c       SHA1 File Hash               Payload

109.120.178[.]253:10000/data[.]txt                  URL        Payload

109.120.178[.]253:10000/bin[.]txt   URL        Payload

bc9dc2e42654e2179210d98f77822723740a5ba6                 SHA1 File Hash               Payload

109.120.178[.]253:10000/123              URL        Payload

65283921da4e8b5eabb926e60ca9ad3d087e67fa                 SHA1 File Hash               Payload

img.dxyjg[.]com/6hiryXjZN0Mx[.]sh                  URL        Payload

149.56.18[.]189/IC4nzNvf7w/2[.]txt                 URL        Payload

228d05fd92ec4d19659d71693198564ae6f6b117 SHA1 File Hash               Payload

54b892b8fdab7c07e1e123340d800e7ed0386600                 SHA1 File Hash               Payload

165.232.121[.]217/rules          URL        Payload

165.232.121[.]217/app/request          URL        Payload

938faec77ebdac758587bba999e470785253edaf SHA1 File Hash               Payload

165.232.121[.]217/app/request63   URL        Payload

165.232.121[.]217:4443/termite/165.232.121[.]217             URL        Payload

92.118.112[.]60/snmpd2[.]elf               URL        Payload

2a90d481a7134d66e8b7886cdfe98d9c1264a386                 SHA1 File Hash               Payload

92.118.112[.]60/36shr[.]txt   URL        Payload

d6a33673cedb12811dde03a705e1302464d8227f                 SHA1 File Hash               Payload

c712712a563fe09fa525dfc01ce13564e3d98d67  SHA1 File Hash               Payload

091b3b33e0d1b55852167c3069afcdb0af5e5e79 SHA1 File Hash               Payload

5eebf7518325e6d3a0fd7da2c53e7d229d7b74b6                  SHA1 File Hash               Payload

183be7a0c958f5ed4816c781a2d7d5aa8a0bca9f SHA1 File Hash               Payload

e7d2f1224546b17d805617d02ade91a9a20e783e                 SHA1 File Hash               Payload

e6137a15df66054e4c97e1f4b8181798985b480d SHA1 File Hash               Payload

95.164.7[.]33:53/sea[.]png    URL        Payload

95.164.7[.]33/rules     URL        Payload

95.164.7[.]33:53/lb64                URL        Payload

c2bc9a7657bea17792048902ccf2d77a2f50d2d7 SHA1 File Hash               Payload

923369bbb86b9a9ccf42ba6f0d022b1cd4f33e9d SHA1 File Hash               Payload

52972a971a05b842c6b90c581b5c697f740cb5b9                 SHA1 File Hash               Payload

95d45b455cf62186c272c03d6253fef65227f63a    SHA1 File Hash               Payload

322ec0942cef33b4c55e5e939407cd02e295973e                  SHA1 File Hash               Payload

6335e08873b4ca3d0eac1ea265f89a9ef29023f2  SHA1 File Hash               Payload

134.213.29[.]14              IP             C2 Endpoint

185.243.115[.]250       IP             C2 Endpoint

80.92.205[.]239              IP             C2 Endpoint

194.36.171[.]43              IP             C2 Endpoint

92.118.112[.]60              IP             C2 Endpoint

109.120.178[.]253       IP             C2 Endpoint

23.163.0[.]111                 IP             C2 Endpoint

72.5.43[.]90     IP             C2 Endpoint

165.232.121[.]217       IP             C2 Endpoint

8.210.242[.]112              IP             C2 Endpoint

149.56.18[.]189              IP             C2 Endpoint

95.164.7[.]33  IP             C2 Endpoint

138.68.44[.]59                 IP             C2 Endpoint

Img[.]dxyjg[.]com         Hostname         C2 Endpoint

Darktrace Model Alert Coverage

·      Anomalous File / Masqueraded File Transfer

·      Anomalous File / EXE from Rare External Location

·      Anomalous File / Multiple EXE from Rare External Locations

·      Anomalous File / Script from Rare External Location

·      Anomalous File / Script and EXE from Rare External

·      Anomalous File / Suspicious Octet Stream Download

·      Anomalous File / Numeric File Download

·      Anomalous Connection / Application Protocol on Uncommon Port

·      Anomalous Connection / New User Agent to IP Without Hostname

·      Anomalous Connection / Posting HTTP to IP Without Hostname

·      Anomalous Connection / Multiple Failed Connections to Rare Endpoint

·      Anomalous Connection / Suspicious Self-Signed SSL

·      Anomalous Connection / Anomalous SSL without SNI to New External

·      Anomalous Connection / Multiple Connections to New External TCP Port

·      Anomalous Connection / Rare External SSL Self-Signed

·      Anomalous Server Activity / Outgoing from Server

·      Anomalous Server Activity / Rare External from Server

·      Compromise / SSH Beacon

·      Compromise / Beacon for 4 Days

·      Compromise / Sustained TCP Beaconing Activity To Rare Endpoint

·      Compromise / High Priority Tunnelling to Bin Services

·      Compromise / Sustained SSL or HTTP Increase

·      Compromise / Connection to Suspicious SSL Server

·      Compromise / Suspicious File and C2

·      Compromise / Large Number of Suspicious Successful Connections

·      Compromise / Slow Beaconing Activity To External Rare

·      Compromise / HTTP Beaconing to New Endpoint

·      Compromise / SSL or HTTP Beacon

·      Compromise / Suspicious HTTP and Anomalous Activity

·      Compromise / Beacon to Young Endpoint

·      Compromise / High Volume of Connections with Beacon Score

·      Compromise / Suspicious Beaconing Behaviour

·      Compliance / SSH to Rare External Destination

·      Compromise / HTTP Beaconing to Rare Destination

·      Compromise / Beaconing Activity To External Rare

·      Device::New User Agent

·      Device / Initial Breach Chain Compromise

·      Device / Multiple C2 Model Breaches

MITRE ATTACK Mapping

Tactic – Technique

Initial Access  T1190 – Exploiting Public-Facing Application

Execution           T1059.004 – Command and Scripting Interpreter: Unix Shell

Persistence      T1543.002 – Create or Modify System Processes: Systemd Service

Defense Evasion           T1070.004 – Indicator Removal: File Deletion

Credential Access       T1110.001 – Brute Force: Password Guessing

Discovery           T1083 – File and System Discovery

T1057 – Process Discovery

Collection         T1005 – Data From Local System

Command and Control             T1071.001 – Application Layer Protocol:  Web Protocols

T1573.002 – Encrypted Channel: Asymmetric Cryptography

T1571 – Non-Standard Port

T1105 – Ingress Tool Transfer

Exfiltration         T1041 – Exfiltration over C2 Protocol

T1048.002 - Exfiltration Over Alternative Protocol: Exfiltration Over Asymmetric Encrypted Non-C2 Protocol

References

^[i]  https://www.ncsc.gov.uk/blog-post/products-on-your-perimeter

^[ii] https://security.paloaltonetworks.com/CVE-2024-3400

^[iii] https://labs.watchtowr.com/palo-alto-putting-the-protecc-in-globalprotect-cve-2024-3400/

^[iv] https://labs.watchtowr.com/palo-alto-putting-the-protecc-in-globalprotect-cve-2024-3400/

^[v] https://labs.watchtowr.com/palo-alto-putting-the-protecc-in-globalprotect-cve-2024-3400/

^[vi] https://security.paloaltonetworks.com/CVE-2024-3400

^[vii] https://www.volexity.com/blog/2024/04/12/zero-day-exploitation-of-unauthenticated-remote-code-execution-vulnerability-in-globalprotect-cve-2024-3400/

^[viii] https://www.volexity.com/blog/2024/05/15/detecting-compromise-of-cve-2024-3400-on-palo-alto-networks-globalprotect-devices/

What is Living off the Land attack?

In the face of increasingly vigilant security teams and adept defense tools, attackers are continually looking for new ways to circumvent network security and gain access to their target environments. One common tactic is the leveraging of readily available utilities and services within a target organization’s environment in order to move through the kill chain; a popular method known as living off the land (LotL). Rather than having to leverage known malicious tools or write their own malware, attackers are able to easily exploit the existing infrastructure of their targets.

The Medusa ransomware group in particular are known to extensively employ LotL tactics, techniques and procedures (TTPs) in their attacks, as one Darktrace customer in the US discovered in early 2024.

What is Medusa Ransomware?

Medusa ransomware (not to be confused with MedusaLocker) was first observed in the wild towards the end of 2022 and has been a popular ransomware strain amongst threat actors since 2023 [1]. Medusa functions as a Ransomware-as-a-Service (RaaS) platform, providing would-be attackers, also know as affiliates, with malicious software and infrastructure required to carry out disruptive ransomware attacks. The ransomware is known to target organizations across many different industries and countries around the world, including healthcare, education, manufacturing and retail, with a particular focus on the US [2].

How does Medusa Ransomware work?

Medusa affiliates are known to employ a number of TTPs to propagate their malware, most prodominantly gaining initial access by exploiting vulnerable internet-facing assets and targeting valid local and domain accounts that are used for system administration.

The ransomware is typically delivered via phishing and spear phishing campaigns containing malicious attachments [3] [4], but it has also been observed using initial access brokers to access target networks [5]. In terms of the LotL strategies employed in Medusa compromises, affiliates are often observed leveraging legitimate services like the ConnectWise remote monitoring and management (RMM) software and PDQ Deploy, in order to evade the detection of security teams who may be unable to distinguish the activity from normal or expected network traffic [2].

According to researchers, Medusa has a public Telegram channel that is used by threat actors to post any data that may have been stolen, likely in an attempt to extort organizations and demand payment [2].  

Darktrace’s Coverage of Medusa Ransomware‍

Established Foothold and C2 activity

In March 2024, Darktrace /NETWORK identified over 80 devices, including an internet facing domain controller, on a customer network performing an unusual number of activities that were indicative of an emerging ransomware attack. The suspicious behavior started when devices were observed making HTTP connections to the two unusual endpoints, “wizarr.manate[.]ch” and “go-sw6-02.adventos[.]de”, with the PowerShell and JWrapperDownloader user agents.

Darktrace’s Cyber AI Analyst™ launched an autonomous investigation into the connections and was able to connect the seemingly separate events into one wider incident spanning multiple different devices. This allowed the customer to visualize the activity in chronological order and gain a better understanding of the scope of the attack.

At this point, given the nature and rarity of the observed activity, Darktrace /NETWORK's autonomous response would have been expected to take autonomous action against affected devices, blocking them from making external connections to suspicious locations. However, autonomous response was not configured to take autonomous action at the time of the attack, meaning any mitigative actions had to be manually approved by the customer’s security team.

Internal Reconnaissance

Following these extensive HTTP connections, between March 1 and 7, Darktrace detected two devices making internal connection attempts to other devices, suggesting network scanning activity. Furthermore, Darktrace identified one of the devices making a connection with the URI “/nice ports, /Trinity.txt.bak”, indicating the use of the Nmap vulnerability scanning tool. While Nmap is primarily used legitimately by security teams to perform security audits and discover vulnerabilities that require addressing, it can also be leveraged by attackers who seek to exploit this information.

Darktrace observed actors using multiple credentials, including “svc-ndscans”, which was also seen alongside DCE-RPC activity that took place on March 1. Affected devices were also observed making ExecQuery and ExecMethod requests for IWbemServices. ExecQuery is commonly utilized to execute WMI Query Language (WQL) queries that allow the retrieval of information from WI, including system information or hardware details, while ExecMethod can be used by attackers to gather detailed information about a targeted system and its running processes, as well as a tool for lateral movement.

Lateral Movement

A few hours after the first observed scanning activity on March 1, Darktrace identified a chain of administrative connections between multiple devices, including the aforementioned internet-facing server.

Cyber AI Analyst was able to connect these administrative connections and separate them into three distinct ‘hops’, i.e. the number of administrative connections made from device A to device B, including any devices leveraged in between. The AI Analyst investigation was also able to link the previously detailed scanning activity to these administrative connections, identifying that the same device was involved in both cases.

On March 7, the internet exposed server was observed transferring suspicious files over SMB to multiple internal devices. This activity was identified as unusual by Darktrace compared to the device's normal SMB activity, with an unusual number of executable (.exe) and srvsvc files transferred targeting the ADMIN$ and IPC$ shares.

The threat actor was also seen writing SQLite3*.dll files over SMB using a another credential this time. These files likely contained the malicious payload that resulted in the customer’s files being encrypted with the extension “.s3db”.

Encryption of Files

Finally, Darktrace observed the malicious actor beginning to encrypt and delete files on the customer’s environment. More specifically, the actor was observed using credentials previously seen on the network to encrypt files with the aforementioned “.s3db” extension.

After that, Darktrace observed the attacker encrypting  files and appending them with the extension “.MEDUSA” while also dropping a ransom note with the file name “!!!Read_me_Medusa!!!.txt”

At the same time as these events, Darktrace observed the attacker utilizing a number of LotL techniques including SSL connections to “services.pdq[.]tools”, “teamviewer[.]com” and “anydesk[.]com”. While the use of these legitimate services may have bypassed traditional security tools, Darktrace’s anomaly-based approach enabled it to detect the activity and distinguish it from ‘normal’ network activity. It is highly likely that these SSL connections represented the attacker attempting to exfiltrate sensitive data from the customer’s network, with a view to using it to extort the customer.

If this customer had been subscribed to Darktrace's Proactive Threat Notification (PTN) service at the time of the attack, they would have been promptly notified of these suspicious activities by the Darktrace Security Operation Center (SOC). In this way they could have been aware of the suspicious activities taking place in their infrastructure before the escalation of the compromise. Despite this, they were able to receive assistance through the Ask the Expert service (ATE) whereby Darktrace’s expert analyst team was on hand to assist the customer by triaging and investigating the incident further, ensuring the customer was well equipped to remediate.  

As Darktrace /NETWORK's autonomous response was not enabled in autonomous response mode, this ransomware attack was able to progress to the point of encryption and data exfiltration. Had autonomous response been properly configured to take autonomous action, Darktrace would have blocked all connections by affected devices to both internal and external endpoints, as well as enforcing a previously established “pattern of life” on the device to stop it from deviating from its expected behavior.

Conclusion

The threat actors in this Medusa ransomware attack attempted to utilize LotL techniques in order to bypass human security teams and traditional security tools. By exploiting trusted systems and tools, like Nmap and PDQ Deploy, attackers are able to carry out malicious activity under the guise of legitimate network traffic.

Darktrace’s Self-Learning AI, however, allows it to recognize the subtle deviations in a device’s behavior that tend to be indicative of compromise, regardless of whether it appears legitimate or benign on the surface.

Further to the detection of the individual events that made up this ransomware attack, Darktrace’s Cyber AI Analyst was able to correlate the activity and collate it under one wider incident. This allowed the customer to track the compromise and its attack phases from start to finish, ensuring they could obtain a holistic view of their digital environment and remediate effectively.

Credit to Maria Geronikolou, Cyber Analyst, Ryan Traill, Threat Content Lead

Appendices

Darktrace DETECT Model Detections

Anomalous Connection / SMB Enumeration

Device / Anomalous SMB Followed By Multiple Model Alerts

Device / Suspicious SMB Scanning Activity

Device / Attack and Recon Tools

Device / Suspicious File Writes to Multiple Hidden SMB Share

Compromise / Ransomware / Ransom or Offensive Words Written to SMB

Device / Internet Facing Device with High Priority Alert

Device / Network Scan

Anomalous Connection / Powershell to Rare External

Device / New PowerShell User Agent

Possible HTTP Command and Control

Extensive Suspicious DCE-RPC Activity

Possible SSL Command and Control to Multiple Endpoints

Suspicious Remote WMI Activity

Scanning of Multiple Devices

Possible Ransom Note Accessed over SMB

List of Indicators of Compromise (IoCs)

IoC – Type – Description + Confidence‍

207.188.6[.]17      -     IP address   -      C2 Endpoint

172.64.154[.]227 - IP address -        C2 Endpoint

wizarr.manate[.]ch  - Hostname -       C2 Endpoint

go-sw6-02.adventos[.]de.  Hostname  - C2 Endpoint

.MEDUSA             -        File extension     - Extension to encrypted files

.s3db               -             File extension    -  Created file extension

SQLite3-64.dll    -        File           -               Used tool

!!!Read_me_Medusa!!!.txt - File -   Ransom note

Svc-ndscans         -         Credential     -     Possible compromised credential

Svc-NinjaRMM      -       Credential      -     Possible compromised credential

MITRE ATT&CK Mapping

Discovery  - File and Directory Discovery - T1083

Reconnaissance    -  Scanning IP            -          T1595.001

Reconnaissance -  Vulnerability Scanning -  T1595.002

Lateral Movement -Exploitation of Remote Service -  T1210

Lateral Movement - Exploitation of Remote Service -   T1210

Lateral Movement  -  SMB/Windows Admin Shares     -    T1021.002

Lateral Movement   -  Taint Shared Content          -            T1080

Execution   - PowerShell     - T1059.001

Execution  -   Service Execution   -    T1059.002

Impact   -    Data Encrypted for Impact  -  T1486

References

[1] https://unit42.paloaltonetworks.com/medusa-ransomware-escalation-new-leak-site/

[2] https://thehackernews.com/2024/01/medusa-ransomware-on-rise-from-data.html

[3] https://www.trustwave.com/en-us/resources/blogs/trustwave-blog/unveiling-the-latest-ransomware-threats-targeting-the-casino-and-entertainment-industry/

[4] https://www.sangfor.com/farsight-labs-threat-intelligence/cybersecurity/security-advisory-for-medusa-ransomware

[5] https://thehackernews.com/2024/01/medusa-ransomware-on-rise-from-data.html

[6]https://any.run/report/8be3304fec9d41d44012213ddbb28980d2570edeef3523b909af2f97768a8d85/e4c54c9d-12fd-477f-8cbb-a20f8fb98912